Mechanical Broadhead Review
SEVR Titanium 1.5 Review
One of the best-penetrating mechanicals ever made — a Grade-5 titanium expandable that hunters trust on elk.
How it scored
Scored on our fixed 5-part system — built from the consensus of field reports, video tests and hunter feedback. Each axis is an independent 0–10 score. How we score ↗
What we liked
- Among the best-penetrating mechanicals available — pass-throughs common on elk
- Flight indistinguishable from field points out to 100 yards in tests
- Toughest head in the SEVR line (survived steel-plate and cinder-block abuse)
- Works reliably at 60-65 lb and lighter draws
- Practice-Lock screw lets you shoot your actual hunting head
- Lock-and-Pivot blades resist deflection on angled shots
Where it falls short
- Scattered bent-blade and partial-deployment reports
- Blood trails more variable than the 2.0
- Premium price
Flight & accuracy
Flight is a SEVR signature, and the 1.5 is the best of the line. Independent and user tests repeatedly show it grouping with field points at distances out to 100 yards, which is exceptional for any broadhead, mechanical or fixed. The Practice-Lock screw lets you sight in with the exact head you will hunt, removing the usual practice-tip guesswork.
For tuned compound shooters, this head essentially removes accuracy from the list of mechanical compromises. It is as confidence-inspiring in the air as anything on the market.
Penetration
This is what sets the 1.5 apart. The narrow 1.5-inch cut, Grade-5 titanium ferrule, and rear-deploying Lock-and-Pivot blades concentrate energy and resist deflection, producing penetration that rivals a tough fixed blade. It is a genuine forum favorite for elk and large game, with pass-throughs the norm rather than the exception.
Crucially, it does not demand a hot rod to work. Hunters report reliable performance at 60 to 65 pounds and below, comfortably clearing the ~50 ft-lb deer floor and stretching into the ~55 to 65-plus ft-lb elk range. For a mechanical, that low energy threshold is a major advantage.
Durability & edge retention
The 1.5 is the toughest SEVR. The Grade-5 titanium ferrule has shrugged off abuse that destroys other heads — testers have driven it into steel plate and cinder block with the ferrule intact. In the field, it routinely survives bone and is often reusable with fresh blades.
The honest note: there are scattered reports of bent blades or partial deployment, as with any mechanical. They are the exception here, not the rule, but they are worth acknowledging.
Blood trail
At 1.5 inches the cut is smaller than the big-cut crowd, so blood is good rather than spectacular, and it is somewhat more variable than the 2.0 version. On a double-lung pass-through you get a clean two-hole trail; on lung-only or single-hole hits the trail can be thinner.
For most hunters the tradeoff is worthwhile: you give up a little blood-trail drama to gain the penetration and reliability that actually put the animal down quickly. If you prioritize maximum blood over bone-busting penetration, the 2.0 is the SEVR to choose.
Value & who it's for
At about $45 for three it is priced like a premium mechanical, and it earns it. You get field-point flight, fixed-blade-class penetration, real durability, and a head you can sight in for real. Few mechanicals justify the money this clearly.
It is the best choice for elk and large-game hunters, and an excellent whitetail head for anyone who values penetration and reliability over raw cut diameter. It is our Best Mechanical pick precisely because it minimizes the usual expandable failure modes.
Specifications
| Brand | SEVR |
|---|---|
| Type | Mechanical |
| Cutting diameter | 1.5" |
| Blades | 2 rear-deploy |
| Grain options | 100gr, 125gr |
| Blade / steel | .032" 420 stainless blades |
| Ferrule | Grade-5 titanium |
| Pack | 3-pack |
| Approx. price | ~$45 / 3-pack |
| Best for | Elk, Large game, Whitetail |
Specs and pricing are approximate and change frequently — confirm with the retailer before buying.
How it compares
FAQ
How much kinetic energy does the SEVR Titanium 1.5 need?
Less than most big-cut mechanicals. Hunters report reliable performance at 60 to 65 pounds of draw and below, clearing the roughly 50 foot-pound deer floor and reaching into the 55 to 65-plus foot-pound elk range. Its narrow cut and titanium ferrule make it forgiving of modest energy, which is a key reason it penetrates so well.
Is the SEVR Titanium 1.5 good for elk?
Yes — it is a forum favorite for elk and large game. The 1.5-inch cut, Grade-5 titanium ferrule, and Lock-and-Pivot blades deliver fixed-blade-class penetration, and pass-throughs are common. Hunters who want maximum penetration on big animals routinely choose the 1.5 over the wider 2.0.
What is the Practice-Lock screw on the SEVR 1.5?
It is a small set screw that locks the blades closed so you can shoot your actual hunting head into a target without deploying it. That lets you sight in with the exact broadhead you will hunt, then swap the Practice-Lock for the hunting screw — removing the usual practice-tip-versus-broadhead accuracy guesswork.
Sources
Sentiment for this review was aggregated from independent tests, hunting forums and retailer reviews, including:
